Eartec Ultalite HD Head Set kit

Covers 2 to 12 persons. ( dependent on Kit # and configuration)

This is a comprehensive kit that is regularly cleaned and maintained for user health and safety.

Perfect for camera , grip or lighting teams , event crew etc to communicate quietly . Any situation where hands free open communication is required.

1 x Master HUB connects 8 x Remote Headsets or if you only need 5 or less then can connect via the Master Headset thus eliminating need for the HUB.

Note: In todays wireless world you can at times get interference if frequency channels are compromised by other devices . Not usually a problem. We use these mostly without issues on film sets with wireless mics , multiple wireless video senders and wireless Lighting controls . If occurs often the fix is re-positioning of the HUBs thus ideal is to have hubs on lx stand or similar so it can be moved to better position to line of sight to all headsets where possible .

Kit 1 ( 2-12 x persons)

1x ULHD-M Single-Ear Master Headset ( Maximum Additional 4 Remote Headsets can connect to the Master Headset )
1 x Single-Ear Master Hub Wired Headset
12 x ULHD-R Single-Ear Remote Headset
2 x HUB w/ Battery and 240v power ( Used for 6 or more headsets up to 9 using the Wired Hub headset )
Hub Power: Internal Battery or via D-tap to Lemo ( Cable supplied with kit)
24 x Rechargeable Headset/Hub Lithium-Ion Batteries
2 x 10 -Bay Multi-port Charger
1 x 2 Bay charger
Dual Hub Mount with Vlock Battery Plate ( Mounts on lx stand or 3/8” spigot)
Headset Neck Straps ( to prevent falling off head to ground)
Headset Storage Bracket ( mounts on lx stand or 3/8” spigot—gives a common place for all users to rest or return their headsets to)

Can use 2 x HUBs for 12 x connected headsets or separately for 2 x groups of 6 connected Headsets ( or other various options )

Conference Mode: ON to connect 2 x HUBs. OFF to run 2 x HUBs separately

Daily Hire: $350.00 + gst

Weekly Hire : $700.00 + gst

Kit 2 ( 2-9 persons)

1 x Single-Ear Master Hub Wired Headset
8 x ULHD-R Single-Ear Remote Headset
1 x HUB w/ Battery and 240v power ( Used for 6 or more headsets up to 9 using the Wired Hub headset )
Hub Power: Internal Battery or via D-tap to Lemo
18 x Rechargeable Headset/Hub Lithium-Ion Batteries
1 x 10 -Bay Multi-port Charger
1 x 2 Bay charger
Headset Neck Straps ( to prevent falling off head to ground)

Daily Hire: $250.00 + gst

Weekly Hire : $500.00 + gst

Kit 3 ( 2-5 persons)

1x ULHD-M Single-Ear Master Headset ( Maximum Additional 4 Remote Headsets can connect to the Master Headset )
4 x ULHD-R Single-Ear Remote Headset
10 x Rechargeable Headset/Hub Lithium-Ion Batteries
1 x 10 -Bay Multi-port Charger
1 x 2 Bay charger
Headset Neck Straps ( to prevent falling off head to ground)

Daily Hire: $175.00 + gst

Weekly Hire : $300.00 + gst

Specs

Frequency 1880 to 1900 MHz ( New Zealand Legal)
Channel Bandwidth 1.728 GHz
Master Headset : Operation Time 4 hours
Remote Headset : Operation Time 6 hours
Master HUB: Operation Time 6 hours
Batteries Charge Time: 3 Hours

Note: Microphone covers are Washed / Disinfected after each hire or replaced if obvious wear or use.

Note: Earphone covers are replaced when obvious signs of wear occur that will impact comfort and performance. Inherent part of the manufacture / design is peeling of the coating on the ear pads. Its not a sign of damage or under performance.

Note: For Health / Safety of the users it is recommended that Headsets are not shared but allocated to an individual for duration of your shoot.

Note: Broken or damaged Headsets from drops etc usually require replacement head band part at cost of $115.00 + gst.

Book: info@tadpole.nz