Flowcine GLink ( Gimbal Link) Max v1.5

The Gold Std for Gimbal Operating

The GLINK is the Ultimate in Gimbal Stabilisation and Operating .

MAX KIT IS THE FULLY ACCESSORISED KIT COVERING ALL WEIGHT RANGES FROM 6 TO 24.9KG

G Link Max Kit
Flowcine xSPINE vest ( Flowcines renowned Steadicam Vest )
4 x Spring Cores: Orange: 6.0-11.0 KG , Black: 10.0-15.5 KG , Grey: 12.5-18.5 KG , Blue : 18-24.9 KG
Two telescopic mounts with retraction bracket arms
Two vertical isolation arms and arm posts
Two triaxial gimbals
Carbon Fibre Gimbal frame
Docking Station
+ more

Allows the operator to produce smooth walking and running shots eliminating steps and other axial errors produced from the human body.
Both GLINK stabilization arms are based on the already proven xARM technology and offers the smoothest and most effective boom action, with a lift range between 6 – 24.9kg
The GLINK system can be fully adjusted to work with different body sizes. The shoulders and sides of the xSPINE have telescopic adjustments that can be set so they fit both large or small operators. And both front and back can be adjustable in height. All pads have extra CELL PE layers to be able to tweak stiffness and thickness of the padding.
The retraction brackets (fore and aft gimbal positioning) section can be adjusted up and down along the xSPINE dovetail for lower or higher shots. The adjustable socket blocks on the retraction brackets can also be telescopically extended in width to adjust clearance from the sides of your body according to your body size.
GLINK stabilization arms can be tuned, through the GLINK spring cores so that the arms float in a close to horizontal position.
The arm post can be adjusted for in height and depending on connection either connect for high (overslung) or low mode (underslung) operation.
Both GLINK gimbal handles at each side can be adjusted toolless on the GLINK CF top frame to allow perfect tilting balance of your camera and gimbal.

More Info Here: FLOWCINE GLINK